Updated Nov 22, 2026· 10 min read

Key takeaways

  • Angle grinders cut metal, tile, and masonry, grind welds, and strip rust in garages and workshops. Compare disc sizes, motor power, and paddle switches.

As an Amazon Associate we earn from qualifying purchases.

An angle grinder earns its place in the garage because one tool covers so many jobs. Fit a cut-off wheel and it slices through rebar, bolts, threaded rod, tile, and pavers. Swap to a grinding wheel and it knocks down weld beads, removes rust, and sharpens mower blades. Add a diamond blade and it scores concrete and masonry, and a wire cup brush turns it into a paint and scale stripper for steel parts.

Our top pick: DEWALT DWE402 4-1/2-Inch Angle Grinder with Paddle Switch. Runner-up: Makita 9557PBX1 4-1/2-Inch Paddle Switch Cut-Off and Angle Grinder Kit.

The five grinders below are all built around the common 4-1/2 inch wheel size, which keeps accessories easy to find and keeps the tool light enough for one-handed control. Three are corded models from DEWALT, Makita, and Bosch, and two are cordless tools from DEWALT and Milwaukee for work away from an outlet. Between them they cover heavy grinding, long cutting sessions, kit value, and grab-and-go convenience, so the right pick mostly depends on how you work and which batteries, if any, you already own.

Disclosure: This article may contain affiliate links. If you buy through these links, we may earn a small commission from Amazon.

DEWALT DWE402 4-1/2-Inch Angle Grinder with Paddle Switch

The DWE402 is the heavy hitter of this group. Its 11 amp AC/DC motor spins a 4-1/2 inch wheel at 11,000 rpm, and that extra motor output over the 7.5 amp tools shows up when a grinding wheel is buried in a weld or a cut-off wheel is working through thick steel. It is a corded tool, so it holds full power for as long as the job runs, with no battery swaps during a long afternoon of fabrication or demo work.

DEWALT built this model around dust control and fast wheel changes. The Dust Ejection System pushes damaging dust and debris particles back out of the air intake vents instead of letting them reach the motor, and oversized brushes extend brush life compared with the previous generation. The One-Touch guard rotates a full 360 degrees with a single action, and the Quick-Change wheel release lets you swap wheels without reaching for a wrench. The paddle switch includes a lock-on button for longer grinding passes, the low profile gear case reaches into tighter spots, and the two-position side handle mounts on either side. At 6.2 pounds it is the heaviest tool here, which reads as planted and steady when grinding, though it is more tiring overhead.

Specs

  • Wheel diameter: 4-1/2 inches
  • Motor: 11 amps AC/DC, 120 volts, 1,320 watts
  • No-load speed: 11,000 rpm
  • Switch: paddle switch with lock-on
  • Spindle size: 5/8-11
  • Weight: 6.2 pounds
  • Includes: 2-position side handle, 4-1/2 inch One-Touch guard, wrench

Makita 9557PBX1 4-1/2-Inch Paddle Switch Cut-Off and Angle Grinder Kit

The 9557PBX1 is the kit pick. Makita pairs its compact 4-1/2 inch paddle switch grinder with a metal carrying case and a working set of wheels, including grinding wheels, cut-off wheels, and a diamond blade, so the box arrives ready for both metal and masonry jobs. For a home garage that does not already stock grinder accessories, that bundle removes a second shopping trip.

The tool itself runs a 7.5 amp motor at 11,000 rpm and weighs only 4.5 pounds, with a slim barrel body that smaller hands can wrap fully around for control during long cleanup work. Makita seals the motor and bearings against dust with its labyrinth construction and protects the windings with zig-zag varnish, both aimed at keeping abrasive grit away from the parts that wear first. The large paddle switch works with a lock-on and lock-off arrangement, and the AC/DC switch means the grinder can also run from a DC power source such as a generator or welder output on a job site. A two-position side handle is included, and the whole kit packs back into the case when the job is done, which keeps wheels and the tool together on a shelf.

Specs

  • Wheel diameter: 4-1/2 inches
  • Motor: 7.5 amps
  • No-load speed: 11,000 rpm
  • Switch: paddle switch with AC/DC switch
  • Weight: 4.5 pounds
  • Kit includes: metal tool case, grinding wheels, cut-off wheels, diamond blade, 2-position side handle

Bosch GWS8-45 4-1/2-Inch Angle Grinder

The GWS8-45 is Bosch’s compact corded entry, built around a slim grip circumference that suits smaller hands and long sessions where control matters more than raw output. The 7.5 amp motor delivers 11,000 rpm at 120 volts and 900 watts, which is plenty for cutting sheet metal, trimming tile, grinding welds, and cleaning up steel in a home workshop.

Where the DEWALT and Makita tools use paddle switches, the Bosch uses a lock-on slide switch, a layout many users prefer for extended grinding because the tool keeps running without a paddle held down. Directed air flow diverts dust away from the tool’s internals, and service-minded brush design makes brush changes straightforward when they eventually wear. The listing includes the grinder with a backing flange, lock nut, spanner wrench, a Type 27 grinding guard, and a side handle, so it is ready to mount a wheel out of the box. Bosch lists the bare tool at 4.2 pounds, keeping it in the same light class as the Makita for overhead and vertical work. If your jobs are mostly cutting, grinding, and surface prep rather than heavy stock removal, this is a tidy, easy-handling way to cover them.

Specs

  • Wheel diameter: 4-1/2 inches
  • Motor: 7.5 amps, 120 volts, 900 watts
  • No-load speed: 11,000 rpm
  • Switch: lock-on slide switch
  • Spindle thread: 5/8-11 UNC
  • Includes: backing flange, lock nut, spanner wrench, Type 27 grinding guard, side handle

DEWALT DCG413B 20V MAX XR Brushless 4-1/2-Inch Angle Grinder (Tool Only)

The DCG413B takes the grinder cordless on DEWALT’s 20V MAX platform. A brushless motor removes brush changes from the maintenance list and stretches run time from each battery, and the tool spins its 4-1/2 inch wheel at 9,000 rpm. That is a step down in speed from the corded tools above, yet for cutting rod, trimming bolts, slicing tile, and light grinding around a house or yard, the freedom from a cord is usually worth more than the last stretch of speed.

Two electronic features set this model apart. The Kickback Brake engages when the wheel pinches, binds, or stalls, slowing the wheel quickly, and the E-Clutch reacts to a pinch or stall by shutting the motor down. The paddle switch gives dead-man control, so the tool stops when you release it. At 3.75 pounds for the bare tool, it is the lightest grinder in this group, which helps on ladders and overhead cuts. It is sold as a tool only, with no battery or charger in the box, so it makes the most sense for someone who already runs 20V MAX batteries. Add a large-capacity battery for grinding sessions, since grinding draws a pack down faster than cutting does.

Specs

  • Wheel diameter: 4-1/2 inches
  • Power source: 20V MAX battery, brushless motor
  • No-load speed: 9,000 rpm
  • Switch: paddle switch
  • Features: Kickback Brake and E-Clutch
  • Weight: 3.75 pounds, tool only
  • Battery and charger: not included

Milwaukee 2880-20 M18 FUEL 4-1/2 / 5-Inch Grinder, Paddle Switch No-Lock (Tool Only)

The 2880-20 is Milwaukee’s current M18 FUEL small grinder, and it is the most flexible tool here on wheel size: the guard and flange setup accepts both 4-1/2 inch and 5 inch wheels, so one tool covers the standard discs in the shop plus the slightly larger wheels that cut deeper. The POWERSTATE brushless motor turns the wheel at 8,500 rpm, and Milwaukee positions this grinder as generating corded-level grinding power from an 18 volt pack.

REDLINK PLUS electronics manage the conversation between tool, battery, and charger to guard against overload during hard grinding, and an electronic clutch helps when a wheel binds. The paddle switch is a no-lock design, so the wheel stops when your grip comes off the paddle. Tool-free accessory changes and tool-free guard adjustment keep wheel swaps quick, and the anti-vibration side handle takes some sting out of long grinding passes. The listing shows an item weight of 4.99 pounds. Like the DEWALT cordless, it ships as a tool only, so it fits a bench that already has M18 batteries; Milwaukee’s larger High Output packs are the natural pairing for sustained grinding and cutting work.

Specs

  • Wheel diameter: 4-1/2 inches and 5 inches
  • Power source: M18 battery, brushless motor, 18 volts
  • Maximum speed: 8,500 rpm
  • Switch: paddle switch, no-lock
  • Item weight: 4.99 pounds
  • Battery and charger: not included

How to Choose

Start with the power source. A corded grinder holds full speed all day, never waits on a charger, and suits bench work, fabrication, and demolition where an outlet is close. A cordless grinder trades some speed and run time for total freedom of movement, which matters on ladders, roofs, fences, and anywhere a cord would drag across the work. If you already own a battery platform, the matching cordless tool is usually the sensible buy; if you own no batteries, a corded tool plus a box of wheels is the simpler start.

Next, match motor output to the work. The 11 amp DEWALT DWE402 removes material fastest and bogs down least under a heavy grinding wheel. The 7.5 amp Makita and Bosch tools give up little in cutting and light grinding, and their lighter weight pays off during long sessions. For occasional cutting and cleanup, any of the five will do the job; for daily grinding, lean toward the stronger corded motor.

Then pick a switch style. Paddle switches stop the wheel when you let go, which many users prefer for cutting and for working in awkward positions. A lock-on slide switch, like the Bosch uses, keeps the tool running hands-free of the paddle during long grinding passes. Neither is wrong; choose the one that matches how you hold the tool.

Finally, check wheel size and what is in the box. Every tool here uses the common 5/8-11 spindle, and the Milwaukee also takes 5 inch wheels for deeper cuts. Kits like the Makita add a case and starter wheels, while the cordless tools arrive bare, so factor in batteries, a charger, and the wheels your jobs need.

FAQ

Can one angle grinder cut both metal and masonry?
Yes. The tool stays the same and the wheel does the work. Use a thin cut-off wheel for steel, a diamond blade for tile, concrete, and stone, a grinding wheel for welds and bevels, and a wire brush for rust and paint. Match each wheel to the material and stay within the speed printed on the wheel.

What is the difference between a paddle switch and a slide switch?
A paddle switch sits under your fingers and stops the tool as soon as you release it, which gives close control during cuts. A slide switch locks on and keeps the tool running until you switch it off, which suits long grinding passes. Many buyers pick based on the kind of work they do most.

Do the cordless grinders come with batteries?
No. Both the DEWALT DCG413B and the Milwaukee 2880-20 are sold as tool only, so a battery and charger must come from your existing kit or a separate purchase. Grinding draws power quickly, so a high-capacity pack is the practical pairing for either tool.

Which wheels fit these grinders?
All five tools use a 5/8-11 spindle thread, and four of them take 4-1/2 inch wheels, the most widely stocked size. The Milwaukee 2880-20 also accepts 5 inch wheels. Always fit the guard that matches the wheel type, and check that the wheel’s printed speed limit meets or exceeds the tool’s no-load speed.

Conclusion

For a corded tool that can grind all day without fading, the DEWALT DWE402 brings the strongest motor and the best dust handling. The Makita 9557PBX1 is the ready-to-work kit, with a case and wheels included, and the Bosch GWS8-45 is the light, slim-grip option for controlled cutting and cleanup. On batteries, the DEWALT DCG413B adds a kickback brake and an electronic clutch in a very light frame, while the Milwaukee 2880-20 takes both 4-1/2 and 5 inch wheels for the deepest cuts of the group. Pick by power source first, then by switch style and box contents, and any of the five will cover the cutting, grinding, and cleanup work a garage or workshop throws at it.

E
Emil Broker Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Angle Grinders for Cutting, Grinding and Garage…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.